Guntermann-drunck DVICenter DP16 Target Modules and User Modules - S Manual de usuario descargar pdf (Pagina 75)

User module »DVI-CON-Fiber«

Target and user modules · 71

Status displays

Front panel

The LEDs on the front panel of the user modules show the system’s operating status.

Section LED Status Meaning

Power Red. On The optional power pack is connected and supplies 12 Volt.

Off The optional power pack is not (properly) connected.

Main On The power pack provides the required voltage.

Off The power pack is turned off or the connection to the mains could

not be established.

Check the proper connection of the power cable at the main power

pack.

Status Trans. On The communication to the matrix switch is established success-

fully.

Off The communication to the matrix switch could not be established.

System On Device boots or firmware update is executed.

Blink-

ing

System is ready for operation.

Console Video 1 On Strong video signal at first video input.

Off No signal at first video input, or the signal quality is too weak to

be processed by the system.

K/M On A local keyboard was detected.

Off No power at PS/2 interface or USB bus.

Flash-

ing

The CPU input (PS/2 or USB) is active and ready.

A local keyboard was not detected.

Trans.

System

Status

Main

Red.

Power

Video

K/M

Service

Console

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 123 124

Sin comentarios

Guntermann-drunck DVICenter DP16 Target Modules and User Modules - S Manual de usuario Pagina 75